Double-coated with hot bitumen and bitumen mastic glued to their triple-layer roll insulation. After that set the caisson height of the walls of which must be the same heights glued roll insulation. The walls of the basement above the mark must be extended to the thickness of the walls of the caisson, and places the conjugation of "thin" and "thick" sections of the walls of a double layer of fluff hot bitumen. Coated with hot bitumen and the inner side walls of the basement above the caisson. Plastering is completed waterproofing the basement floor and walls of cement-sandy-nym substance. You see, any of the options involves waterproofing basement walls plaster hot bitumen. Surfaces designed for coating asphalt, must first be cleaned of dust and gryazische. Bitumastic as waterproofing material used a very long time and thanks to its own low cost is still more famous for various developers.
But it is precisely at the moment are spread, etc. Materials of this purpose, namely, Turkish manufacturers of construction materials perform the delivery to the Russian market of plastic waterproofing mat la MARKEM SUSTOP SS-5-based acrylic emulsion. SUSTOP SS-5 is applied by brush, roller or spray only on dry, cleansed of gryazische and Dust the surface. For the first "primer" layer in node of its breeding ratio of 6: 4. Complete drying 2-layer occurs in 4 -5 hours, but is aware that in cold weather when the temperature goes down below 5 "C, as in time rain SUSTOP SS-5 is not dry. The finished coating is waterproof on the outside and touch it suggests a layer of rubber. At the highest level of ground water except for waterproofing works have resorted to other measures that have to prevent penetration into the basement of groundwater. Device is more effective drainage. Around the structure at 2 - 3 MTR from the foundation dig the groove, and they must be sloped away from home and go to the team bypass ditch. At the bottom of the grooves in the pad of gravel laid pipes "of clay, plastic, etc.," with holes in the walls. By Siim hole ground moisture will seep into the pipes and discharge into the side of the house. Grooves with the pipes on Ouse poured gravel, another Ouse - sand, and the final-third - ground. If there are some natural home header "of the ravine, river, etc." grooves with the tubes taken out into it.

Posted by: |